How to Replace the Wheel on a Troy-Bilt Walk Behind Mower

Length of Clip: 00:58

This video will show you how to replace a wheel on this Troy-Bilt walk behind mower.  Depending on your model, the instructions in this video may vary slightly.  Always be sure to check your operator's manual for detailed instructions.


Step 1

Make sure the engine is cool. Disconnect the spark plug ignition wire.

Step 2

Put the height adjuster at the highest level.

Step 3

Using a socket, unbolt the wheel and remove it from the mower.

Step 4

Lubricate the new wheel's bushings with a dry lubricant like graphite.

Step 5

Tighten the wheel nut and adjust the height of the wheel to match the other three.

Step 6

Reconnect the spark plug ignition wire.

Did you find this helpful?