This video will show you how to replace a wheel on this Troy-Bilt walk behind mower. Depending on your model, the instructions in this video may vary slightly. Always be sure to check your operator's manual for detailed instructions.
Instructions
Step 1
Make sure the engine is cool. Disconnect the spark plug ignition wire.
Step 2
Put the height adjuster at the highest level.
Step 3
Using a socket, unbolt the wheel and remove it from the mower.
Step 4
Lubricate the new wheel's bushings with a dry lubricant like graphite.
Step 5
Tighten the wheel nut and adjust the height of the wheel to match the other three.
Step 6
Reconnect the spark plug ignition wire.
