How to Change the Oil on Your Troy-Bilt Edger

This video will show you how to change the oil on this Troy-Bilt edger.  Depending on your model, the instructions in this video may vary slightly.  Always be sure to check your operator's manual for detailed instructions.

Instructions

• Step 1: Turn the edger off and make sure the engine is cool. Disconnect the spark plug ignition wire.
• Step 2: Remove the drain plug.
• Step 3: Lift the edger and pour the old oil into an oil drain pan.
• Step 4: Add new oil as instructed in your operator's manual.
• Step 5: Reconnect the spark plug ignition wire.
• Step 6: Dispose of oil properly.