Changing Gas on a Cub Cadet Walk-Behind Mower
Length of clip: 01:00
This video will show you how to change the gas on a Cub Cadet walk-behind mower. Depending on your model, the instructions in this video may vary slightly. Always be sure to check your operator's manual for detailed instructions.
- Step 1
Remove the spark plug ignition wire.
- Step 2
Unscrew the gas cap.
- Step 3
Using the Arnold Siphon Pump, place the orange tube into the gas tank on the engine and the black tube into a proper container.
- Step 4
Prime the pump by pumping the handle three or four times. Once the liquid begins to flow, it will continue flowing without further pumping.
- Step 5
Remove the Arnold Siphon Pump and add new gas.
- Step 6
Replace the gas cap.
- Step 7
Reconnect the spark plug ignition wire.
- Step 8
Dispose of the gas properly.