Financing Now Available for Online Purchases.* Learn More
CSV 070 Self-Propelled Chipper Shredder Vacuum
Item#:
24A-07MP766
$699.99
CSV 070 Self-Propelled Chipper Shredder Vacuum
Item#:
24A-07MP766
$699.99
Or
$59/mo No interest if paid in full within 12 months2
Interest will be charged from the purchase date if the purchase balance is not paid in full at the end of the promotional period. Advertised minimum payment is greater than required minimum payment.
This chipper-shredder vac combines 3-in-1 capability - to chip wood, shred or vacuum debris - with a self-propelled transmission to provide you with even more power and easier operation. You can depend on Troy-Bilt's solid construction, including hardened steel blades and chipper knives, for years of top performance. The CSV 070 chipper shredder vac is the only tool you'll need this spring or fall!
- 3-in-1 chipper shredder vacuum
- High/low speed self-propelled transmission
- 24" vacuum width
- 7 ft on-board vacuum hose with 3 ft extension
- 1.5" chipping capacity
- 8:1 debris reduction ratio
- 2-bushel, felt-lined collection bag
- 8" x 2" front and rear wheels with ball bearings
- 159cc* OHV Troy-Bilt® engine
Attachments & Accessories
Specs & Maintenance
Engine
- Engine Brand Troy-Bilt®
- Engine Model Number 752Z1X65CU
- Engine Model 1X65CUB OHV
- Engine Displacement 159cc
- Starter Type Recoil
- Fuel Tank Capacity 1.2 qt
- Engine Oil Capacity 18 oz
Warranty
- Warranty 2-year limited
Controls
- Handle Gullwing
Power and Performance
- Starting System Recoil Start
Wheels
- Tread Pattern S-Wave
- Front Wheels 8"
- Rear Wheels 11"
Additional Specifications
- Model Number 24A-07MP766
Specifications
- Drive Self-Propelled
- Hose(s) 7 ft Hose with 3' Extension
- Chipping Capacity 1.5 in Dia. Branches
- Chipper Blades One Hardened Steel
- Shredder Flails Six Cast Steel Flails (Two Sets of Three)
- Impeller 13.5" Cast Aluminum
- Reduction Ratio 8:1
- Debris Bag 2 Bushel Felt-Lined
Blade Specifications
- Deck Cutting Width 24 in
Disclaimer
- Specifications Disclaimer Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
Model | Manual | Form Number | |
|---|---|---|---|
| 24A07MP766 | MAN:OWN:COL3X_159CC_196CC_ENG | ||
| MAN:OWN:COL3X_159CC_196CC_ENG | 769-12384 | Download | |
| MAN:OWN:COL3X_159CC_196CC_ENG | 769-15770 | Download | |
| MAN:OWN:COL3X_159CC_196CC_ENG | 769-15770B | Download | |
| MAN:OWN:COL3X_159CC_196CC_ENG | 769-15770C | Download | |
| MAN:OWN:DIGEST_159_196_224CC_E | 769-25350 | Download | |
| MANL:OPER:BILING:24A:02X 05X 0 | 769-21550 | Download | |
| MANL:OPER:BILING:24A:02X 05X 0 | 769-21550A | Download | |
| MANL:OPER:BILING:24X:07X:TROY | 769-10746 | Download | |
| MANL:OPER:BILING:24X:07X:TROY | 769-11815 | Download | |
| MANL:OPER:BILING:MTD:159cc:GEN | 769-10972B | Download | |
| MANL:OPER:BILING:MTD:159ccENG | 769-08388D | Download | |
| MANL:OPER:BILING:MTD:159ccENG | 769-08388E | Download | |
| MANL:OPER:BILING:MTD:159ccENGI | 769-08388B | Download | |
| MANL:OPER:ENGL:24X:07X:TROY | 769-09006 | Download | |
| MANL:OPER:ENGL:24X:07X:TROY | 769-09847 | Download | |
| MANL:OPER:FRENCH:24A:02X 05X 0 | 769-12322_FR | Download | |
| MANL:OPER:FRENCH:24A:02X 05X 0 | 769-21550_FR | Download | |
| MANL:PARTS:2013:24X | 769-08965 | Download | |
| MANL:PARTS:2014:24X | 769-09834 | Download | |
| MANL:PARTS:2015:24X | 769-10808 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EVP: | 769-15172 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EVP: | 769-17170 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EVP: | 769-23591 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EXH: | 769-15174 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EXH: | 769-17172 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EXH: | 769-23593 | Download | |
| SHEET:SUPP:WARR/PARTS:TB CSV | 769-21670 | Download | |
| SHEET:SUPP:WARR/PARTS:TB CSV | 769-21670A | Download |
Product Reviews
Rated 5 out of
5
by
nyyankees from
Solid/Dependable
I have owned my chipper vac since 2005. Starts every year with just a couple of pulls on the starter cord. Runs everytime. Does a great job vacuuming leaves and debris. I can run it all day with just a couple of fuel stops. Would be nice if it had electric start.
Date published: 2010-11-10
Rated 2 out of
5
by
Mohawkth from
Great Vacuum with one Big and Expensive Issue
I bought this three seasons ago and it does a great job vacuuming. Good engine that starts easily and good performance. The issue is that the clasps that close the bag break very easily. One broke 3/4 of the way through the first season. The replacement is very expensive, about 18% of the cost of the original equipment. I paid a lot more than that because my local Troy Bilt repair place didn't tell me you don't have to buy the whole assembly. I hardly used it the second season but about 1/4 of the way through this season, a clasp broke again. I also noted that the rubber that connects the handle to the bag is cracking and will soon cause the handle to break off the bag, which will make it unusable. Picture of broken clasp shown. If it weren't for this issue, it would be great value. There are folks on Amazon complaining also. It's a shame to have a great product with one poorly designed item that ruins its value and utility.
Date published: 2018-11-27
Rated 3 out of
5
by
Free from
useful when it works
Good Vac, power is adequate. However iv'e had two hoses break in a year and one bag none of which seems to be covered by extended warranty. I also had the engine seize the first year and i struggled to find a repair center for service because as one guy put it "its a chore to get paid by the company". overall if its running it makes clean up a lot better and faster.
Date published: 2018-05-16
Rated 3 out of
5
by
Eron from
Convenient but little issues
When it works, it is a quick way to get yard work done, especially cleaning up leaves. I have had the unit for 2.5 yrs and live in Florida which i would consider light duty compared to the North.
I have run into a couple of issues making this difficult. The flapper that controls the suction
to the hose won’t close so the front vac has reduced suction. The spring is to weak which
robs suction when using the front vac.
The front valve used to open and close the main flap between the front and rear vac has broken with very little use. When it is open to the rear the area the stronger front vac is blocked off, when closed the broader center van is functioning. The flapper lever on top is now broken and the flapper is stuck so the stronger front vac will not work.
You should be aware of a couple things in general.
1. This is a sizable motor that has to be pull started. I’m 6’1, 250lbs and i have to give it a big pull to get it started. If you are smaller you can expect even more effort to get it to start. I am amazed that it will start with one good pull and that is a huge plus. Be sure to pull out the choke when starting.
2. Use high octane, ethanol free fuel. The high octane fuel starts burns easier making it easier to start and it runs well.
3. Remove fuel when storing. I could not start the unit one year until i replaced the fuel. I didn’t think it mattered that much until I experienced this.
Date published: 2020-03-22
Rated 4 out of
5
by
skibi50 from
skibi50
When I first got this machine the right drive wheel would not drive. I had to bring it in to an authorized dealer to get it fixed under warranty. It is not easy to start. There is no chock or primer bulb or speed control. After one year the cheap Chinese made spark plug went bad and I had to change it.
Date published: 2018-05-16
Rated 4 out of
5
by
Jack from
Missing 2-speed ability
The only problem I have with it is I don't have the 2-speed shifting lever. Because it is fall I can't send it back or tie it up in some service center to be correct. Customer Service did send me what they believed were the parts but they were the drive train parts which I already have.
Date published: 2020-11-22
Rated 3 out of
5
by
MulchingMan from
Mulches Well, Hard to Start
I have had this Chipper Shredder Vac for 2 years and it does an excellent job once I can get it started. The more it runs the harder it is to restart. Since you have to stop it each time you empty the bag, once it gets warm/hot, it takes a lot of pulls to get it started again. It seems to be all about setting the choke position just right to get it to start again. Very frustrating when you have a lot to do and you wear yourself out trying to start it again.
Date published: 2020-03-20
Rated 4 out of
5
by
Martha from
It is selfpropelled mower
4 years ago. Good mower. Normally it cranks good. Not noisy. Has different levels to cut. I have enjo6 getting out in the sunshine to cut my yard. Thank you.
Date published: 2020-01-08