×

How to Change the Gas on a Troy-Bilt Rider

Length of Clip: 1:12
This video will show you how to change the gas on a Troy-Bilt riding mower.  Depending on your model, the instructions in this video may vary slightly.  Always be sure to check your operator's manual for detailed instructions.

Instructions

Step 1

Place your mower on a flat, level surface. Turn the mower off. Make sure the engine is cool. Remove the ignition key and disconnect the spark plug ignition wire.

Step 2

Unscrew the gas cap.

Step 3

Using the Arnold Siphon Pump, place the top port into the gas tank on the engine, and the bottom port into a proper container.

Step 4

Prime the pump by pumping the handle three to four times. Once the liquid begins to flow, it will flow without further pumping.

Step 5

Remove the Arnold Siphon Pump and add new gas.

Step 6

Replace the gas cap.

Step 7

Reconnect the spark plug ignition wire.

Step 8

Dispose of the gas properly.



Did you find this helpful?    
http://img.youtube.com/vi/bNmovPAyJ5w/1.jpg
| Prod2 |