How to Change the Oil on a Troy-Bilt Walk Behind MowerLength of clip: 1:09
- Step 1
Remove the spark plug ignition wire.
- Step 2
Remove the dip stick.
- Step 3
Using the Arnold Siphon Pump, place the orange tube into the dip stick hole on the engine and the black tube into the oil pan.
- Step 4
Prime the pump by pumping the handle three to four times. Once the liquid begins to flow, it will flow without further pumping.
- Step 5
Remove the orange tube and add new oil as instructed in your operator's manual.
- Step 6
Replace the dip stick.
- Step 7
Replace the spark plug ignition wire.
- Step 8
Dispose of oil properly.